Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 80

Thread: Gigaparts Sweepstakes

  1. #51

    Default

    The FT-950's microphone plug uses pin ___ for +5V.

    8
    2
    4
    6

  2. #52

    Default

    The FT-950's CAT plug uses pin ___ for ground.

    5
    8
    4
    7

  3. #53

    Default

    The FT-950's Linear port uses pin ___ for Band Data C.

    7
    4
    8
    6

  4. #54

    Default

    The FT-950's RTTY/PKT port uses pin ___ for Data Out.

    1
    3
    5
    2

  5. #55

    Default

    The FT-950's RTTY/PKT port uses pin ___ for Data in.

    1
    2
    3
    4

  6. #56

    Default

    The FT-950's Rotator plug uses pin ___ for Speed.

    1
    3
    4
    7

  7. #57

    Default

    On the Yaesu FT-2000, ____ .

    the frist mixer is a metal-oxide-semiconductor field-effect transistor
    the receiver is a double-coversion type
    the first IF is at 69.450 MHz
    the first IF uses a down-conversion technique that yields excellent image acceptance.

  8. #58

    Default

    On the FT-2000, the torque of the Main Tuning Dial Knob may be adjusted by doing which of the following?

    Rotate the rear skirt of the knob to the right or left.
    Hold down the rear skirt of the knob, and rotate the knob itself to the right or left.
    Hold down the knob itself, and rotate the rear skirt of the knob to the right or left.
    Disassemble the radio and add shims behind the knob.

  9. #59

    Default

    Which of the following types of receiver noise can often be reduced by use of a receiver noise blanker?

    Ignition Noise
    Broadband �white� noise
    Heterodyne interference
    All of these choices are correct

  10. #60

    Default

    The FT-2000's Automatic Antenna Tuner may not be able to reduce an impedance mismatch greater than ____.

    3:1
    5:1
    8:1
    4:1

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •